BMWCCT台灣車主聯誼會 - 查看單個文章

tsaicl · 2011-11-22, 07:22 PM

http://www.bimmerinfo.com/files/e46trans/ZF5HP19.pdf
zf 5hp19的加變速箱油程序(當然無換油程序) 我看過n遍了奉勸還是50度以內換油
油道很細和Oring 有可能因換油溫度太高就掛了

Allow time for excess oil to drip then install Fill Plug (Pos. 01.010/340). Torque Fill Plug to
35Nm ±3.5Nm (see also Repair Manual).
Oil temperature must not exceed 122ºF (50ºC).

2011-11-22, 07:22 PM	#25
tsaicl 正式會員註冊日期: 2005-11-27 文章: 2,191 精華: 0	http://www.bimmerinfo.com/files/e46trans/ZF5HP19.pdf zf 5hp19的加變速箱油程序(當然無換油程序) 我看過n遍了奉勸還是50度以內換油油道很細和Oring 有可能因換油溫度太高就掛了 Allow time for excess oil to drip then install Fill Plug (Pos. 01.010/340). Torque Fill Plug to 35Nm ±3.5Nm (see also Repair Manual). Oil temperature must not exceed 122ºF (50ºC). 此篇文章於 2011-11-22 07:29 PM 被 tsaicl 編輯。