查看單個文章
舊 2012-12-17, 02:39 PM   #25
ST5618
正式會員
 
註冊日期: 2012-09-27
住址: 泰國
文章: 2,136
精華: 1
車型: E46/E60/F30/F10
贊助: 未贊助
引用:
作者: djzeke 查看文章
我是看到國外網站下面這一段寫的,請ST大大你可以斟酌考慮換了吧,
所以我認為應該已經內漏了,拆下來沒內漏的話,來鹿港我請你吃道地小吃。

The following is an E46 & E39 double vanos piston seals R&R (remove and replace) procedure.

If the valve cover gaskets are over 40k miles (64k kilometers) old, then it’s prudent to replace them during this repair. If they are over 80k miles (128k kilometers) old, then it is a requirement to replace them during this repair, otherwise they might leak due to being dismounted and reused. These gaskets have an estimated lifespan of ~60k miles (96k kilometers) and replacing them during this repair requires no extra effort. The needed parts and replacement procedure are included as optional.
dj大別嚇我內~~ 我的工單上已經一托拉庫的項目要做了,目前冷車起動都還動力十足一點就著也不會抖動,所以暫時應該還不用處理啦~~~ (自我催眠中)

哪天現有的工單處理完而手又癢的時候即使冷車發動沒抖,有時間的話會考慮考慮的。

謝謝提醒嘿。
-----------------------------------------------------------------------
E46 DIY日記淺談NCS Expert老BMW上的MP3
ST5618 目前離線   回覆時引用此篇文章