CCT Forums
About CCT
CCT Members
Appliance
Link
   

返回   BMWCCT台灣車主聯誼會 > 註冊車友區 > 『改裝和動力討論』
註冊帳號 討論區幫助 日曆事件 搜尋 今日新文章 標記版面已讀 CCT購物網


回覆
 
主題工具 顯示模式
舊 2020-08-15, 11:34 AM   #1
tsaicl
正式會員
 
tsaicl 的頭像
 
註冊日期: 2005-11-27
文章: 2,191
精華: 0
油門適應復位
http://www.e46zone.com/forum/topic/4...daption-reset/

For those with M54 M54 MS43 lumps under the bonnet with throttle drive by wire ( electronic ) and not by a cable there is a reset than can be made that may improve throttle response. This is typically done if a customer complains after an a new EDK is installed - allthough it should be done as part of the procedure anyway).

Its easy and quick just 20 seconds thats all !!

1 Place key in ignition and turn to detent 1 and count for 10 seconds ( only postion 1 do not start the engine. )

2.Turn key back to 0 postion and count for another 10 seconds

3.Now turn the key all the way to detent 3 to start the engine

Thats it your throttle is now reset. this can help to improve the cars throttle response. this little trick is always worth a go if you feel the car is a little sluggish or has been bought off someone who has just gone to the shops n back in thier BM. In theroy the throttle should now adapt slightly to your driving style



tsaicl 目前離線   回覆時引用此篇文章
按 "讚" 到facebook

回覆

書籤

主題工具
顯示模式

發文規則
不可以發表新主題
不可以發表回覆
不可以上傳附件
不可以編輯自己的文章

啟用 BB 代碼
討論區啟用 表情符號
討論區啟用 [IMG] 代碼
討論區禁用 HTML 代碼

討論區跳轉


所有時間均為台北時間。現在的時間是 04:29 AM


台灣賓士零件網 基福汽車 正煇汽車

Powered by vBulletin® 版本 2025
版權所有 ©2000 - 2025,BMWCCT.