BMW E46 換電瓶後，儀表板不亮了

小石頭 · 2016-07-13, 07:41 PM

https://www.youtube.com/watch?v=zmM-N_AQxXY
這裡面有提到3個解決方式
我覺得你先試試：
did you disconnect your battery? when you do that, you have to re calibrate everything. turn the car ona nd turn the wheel all the way to lock position to the right, then all the way to lock position to the left. all the lights should reset and turn off, and you should have full function again
打開地電門方向盤右打滿再左打滿....

I've not long upgraded my LED's to blue then when I reconnected the cables the same happened, I just drove it a couple of miles and the car must of reset it self all now fine, not sure if will help

似乎上路開個幾公里繞一繞會好？

kouchou · 2016-07-14, 04:20 PM

引用:

作者: 小石頭

https://www.youtube.com/watch?v=zmM-N_AQxXY
這裡面有提到3個解決方式
我覺得你先試試：
did you disconnect your battery? when you do that, you have to re calibrate everything. turn the car ona nd turn the wheel all the way to lock position to the right, then all the way to lock position to the left. all the lights should reset and turn off, and you should have full function again
打開地電門方向盤右打滿再左打滿....

這是指啟動後，然後再右打滿，再左打滿嗎?

引用:

I've not long upgraded my LED's to blue then when I reconnected the cables the same happened, I just drove it a couple of miles and the car must of reset it self all now fine, not sure if will help

似乎上路開個幾公里繞一繞會好？

原本我認為是電容出問題
我想應該這是一種方式
但昨天開了二小時，仍是沒有作用

2016-07-13, 07:41 PM	#1
小石頭正式會員註冊日期: 2008-05-02 住址: 台灣文章: 441 精華: 1	https://www.youtube.com/watch?v=zmM-N_AQxXY 這裡面有提到3個解決方式我覺得你先試試： did you disconnect your battery? when you do that, you have to re calibrate everything. turn the car ona nd turn the wheel all the way to lock position to the right, then all the way to lock position to the left. all the lights should reset and turn off, and you should have full function again 打開地電門方向盤右打滿再左打滿.... I've not long upgraded my LED's to blue then when I reconnected the cables the same happened, I just drove it a couple of miles and the car must of reset it self all now fine, not sure if will help 似乎上路開個幾公里繞一繞會好？