[求助]Reset保養燈

Matthew · 2006-06-05, 03:48 PM

[這篇文章最後由Matthew在 2006/06/05 04:18pm 第 1 次編輯]

請問一下有經驗的車友前輩們....................
要Reset保養燈是
先將電門打開至第二段(發動前那段),PIN7接地約3秒鐘嗎?
我看E36 DIY網站上是這樣寫的
================================================================
With the ignition switch at (position two) and the engine not running, grounding pin seven (7) of the diagnostic connector for approximately three (3) seconds will reset the oil service lights. Grounding pin seven (7) for approximately twelve (12) seconds will do an inspection service reset.
================================================================
我知道找有保養歸零的保養廠就可以了,但是小弟還是想一解心中的疑惑!!
麻煩知道的前輩們解惑一下唄 :em15:
徹底發揮DIY精神............ :em08:

2006-06-05, 03:48 PM	#1
Matthew 正式會員註冊日期: 2006-05-13 住址: 中台灣文章: 85 精華: 0	[求助]Reset保養燈 [這篇文章最後由Matthew在 2006/06/05 04:18pm 第 1 次編輯] 請問一下有經驗的車友前輩們.................... 要Reset保養燈是先將電門打開至第二段(發動前那段),PIN7接地約3秒鐘嗎? 我看E36 DIY網站上是這樣寫的 ================================================================ With the ignition switch at (position two) and the engine not running, grounding pin seven (7) of the diagnostic connector for approximately three (3) seconds will reset the oil service lights. Grounding pin seven (7) for approximately twelve (12) seconds will do an inspection service reset. ================================================================ 我知道找有保養歸零的保養廠就可以了,但是小弟還是想一解心中的疑惑!! 麻煩知道的前輩們解惑一下唄 :em15: 徹底發揮DIY精神............ :em08: