(求救求救) E39 M54 525 DME混合气制備 汽缸列一 超過允許範圍

[CTK1980]

作者: bmwfu2002

Mixture Preparation Bank 1

2882 = Mixture preparation, Bank 1 (cylinders 1-3)
The crankshaft position fault is likely due to a faulty crankshaft position sensor. The mixture codes may very well be a result of the crankshaft position sensor’s faulty signal. We would recommend that you replace the sensor, clear the codes, and then see if any return. For example, if the crankshaft position code does not return, but the mixture codes do, the sensor has been repaired, but the mixture codes will still need to be addressed. If no codes return, then the mixture codes were due to the faulty information that the sensor was sending to the engine management system.
曲軸位置故障可能是由於曲軸位置傳感器故障。 混合代碼很可能是曲軸位置傳感器的故障信號的結果。 我們建議您更換傳感器，清除代碼，然後查看是否有任何返回。 例如，如果曲軸位置代碼不返回，但是混合代碼是，則傳感器已經被修復，但是混合代碼仍然需要被尋址。 如果沒有代碼返回，則混合代碼是由於傳感器發送到發動機管理系統的錯誤信息。
****網路找的***參考看看...